Sie sind nicht angemeldet.

Suchergebnisse

Suchergebnisse 1-20 von insgesamt 31.

Montag, 23. August 2010, 21:30

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

A couple of years ago, my wife was making ( read: painting) christmasballes, to hang in the christmastree. She also hooked on making special things When i looked at the plexy balls, i know, that sometime, i could use it for another project Well, ladies and gents, IT'S TIME These are the plexy balls, you can buy 'm in every size. (according to his wife).. A old friend of my Earl Zausmer build 12 or 13 years ago something like this. Then I made a hole in the bigget bal, so the little one stands a ...

Montag, 23. August 2010, 21:29

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

This is the 3th layer of epoxy. Rubb it all down flat and equal everywhere, and then another 4th layer of epoxy. Some pics After firmly rubbin' the epoxy, I added another layer op expoxy. Maybe it's not so visible on the pic, but it's quit flat already. 4th layer of epoxy. Now it's important to rub the last layer good. Start with an 800 and end with a 2000. I also found the same black leather to cover the panel like the original one.

Montag, 23. August 2010, 21:28

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

:drinks:The bottomsides of the doorpanels will have to be done in CARBON FIBRE. So a dificcult object to get in the Carbon fibre. But we must admit, it's done nicely.. Many time was put into preparation the prevent the CF - overlay to got wrong at any place. This annoying little side was one of the many things that could go wrong. Also, I was satisfied to get the little lamp in there. makes the piece a bit more interesting then one big lumb piece. This is the ditch I disced into the panel. For t...

Montag, 23. August 2010, 21:28

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

As you can see, het got the disc in there again. Disced a ditch in there so I gots some place to get the overflowingin leather away. The alu and the pole I got on there so it all stays equal when it gets overlayed. you see, the plates can be rattled off. as you guys can see, the bottom part is already painted black, you all know what happens then... indeed, CARBON TIME

Montag, 23. August 2010, 21:28

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

In the meanwhile I made a whole into the doors platework, behind the speaker. You can see the windowglider. Just nog touching the speaker. Made some more parts, to fill up the other wholes. On the background, there's a alu plate of 4mm thick. Very hard and strong. In the middle you can see 2 Carbonkevlar parts. I made em as thin als possible . On the foreground you see 4 little rings I made, to screw the doorpanel extra tight. If you look to the second on the right, there's a little rubber he pa...

Montag, 23. August 2010, 21:27

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

Here a couple of pics of the original doorpanel, to compare more easy. And this is what it's going to be. The door, on the speaker, gained 2cm more to the inside of the car. This is what I had to do to get the speaker in there in a good way. The seperate polyester cap, that goes over the speaker, will come in silver, like the trim. This will contrast with the rest. Picture with the grill. If I look at this all, I think it doesn't contrast to much with the lines, shape of the original panel. Has ...

Montag, 23. August 2010, 21:27

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

Designerdepartment going at full speed Worked on the ring where the speaker goes in, more smooth now. Step by step, till it workes out to something he likes; On picture, maybe it doesn't look so good, but IRL it looks fine. The forms i made also come back in the original panel. So it's more styled this way.

Montag, 23. August 2010, 21:26

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

I'ts time to rebuild the doorpanels. The doorpanels i using are secondhanded. So the car remains complete, and I doesn't have to drive without panels all winter. Demounted some stuff. Started taking off the leather. awefull job The 16cm FOCAL speaker is taking approximately the same place where the original speak is. In the meanwhile , I let the rings mild nicely. I milded some MDF wooden rings to tighten on the doorpanel. To lock the speakers tight I made a extra alu plate of 6mm thick. Here I ...

Montag, 23. August 2010, 21:25

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

Now the big question is, WHY THE HECK make such a big piece of CF, but i wanted to be sure that EVERYTHING looks perfect, from what ever angle you look. Again with the neon. This will come under the right vent, just for looks. On the leftside we have the CF piece where the motor is at, so it looks more the same on the right side went you look through the vents.

Montag, 23. August 2010, 21:25

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

This is how the motor is beeing placed; You can see I put an little alu cover over the bar from the motor, not easy to find... This is the same material as where the engine is screwed on. Made an extra piece of carbonkevlar to fill in the big wholes on the bottom of the motor. A little more contrast with the CF. The picture is taken when you're standing right behing the trunk. Now you can see it all.

Montag, 23. August 2010, 21:24

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

The grill is almost complete. for now, no Focal Logo's anymore althought... The next work on the list is for next days, maybe weeks. The actuator, that bringt the amplifier to life, will get a nice place. For those who forgot, this is how the motor was placed. This was only to see if the thing worked like I wanted. The meaning is, if you take the left carbon piece away, you see the motor and the cd-changer. If I wanted to show this, it must be made SHOWABLE Then, I put the actuartor on a alu pla...

Montag, 23. August 2010, 21:24

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

As you can see, the whoel sub part is see-able and yet, it's covered with real glass I can clean as much as he wants, without making scratches. The nice thing about this grille, is that I made it with a simple milling tool. This is the proof everyone can make something really nice, with non-expensive equipment.

Montag, 23. August 2010, 21:23

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

Took the uppermill and started the outer-ring. Started to begin polishing. Is a heck of a job, people who polished with heavy machinery before know... It's kinda hard to do this without the brushes hacking into the alu.. I did this: Screw the piece on a piece of wood that you can hold on tight. 1) you won't burn ya fingers/hands on the alu 2) the brush can't bite himself into sth

Montag, 23. August 2010, 21:23

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

This will be the inner-ring, what goes in the grill. First I mild a MDF wooden ring and rounded the edges. What you see now is the upperside. Comes in CF btw this is the bottomside. You see I made some screwbusses in it. Made an alu ring of 3mm thick for on the bottomside. Must be very solid so the grill can't bend in the middle. Here you see the 2 parts on each other. Between there's 2mm place for the innox plate on the outside, and the alu from in the centre. The middle ring going into Carbon ...

Montag, 23. August 2010, 21:22

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

I made a grill, to cover the sub-box. The frame es milled out of MDF wood. Here you can see the top of the upper ring. This one, you will see, and will be covered in Carbon On the picture, you can see he miled a little ditch. covering the frame in Carbon

Montag, 23. August 2010, 21:22

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

The pieces are finally done. all that work, pppfffffff, but it was worth it . Here's a picture from the front. You can see a V where everythings slides into. Then he fiberglassed a little alu piece that is fastened bigtime. In the whole those things are layed into, fiberglassed a firm alu bridge, and there the backside slides into. These things have to come out really fast, cause his GPS and CD loader is behind it.

Montag, 23. August 2010, 21:22

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

Some chinese sticks put them together painted with polyester/fiberglass rubbed and filled, filled and rubbed this will be carbonized

Montag, 23. August 2010, 21:21

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

Then I started to tair apart the Alpine CD player. Did away the front, and made some trolleys to fasten the thing. here you can see the front of the CD player The ALU- box where the amp should come is foreseen with the hinge. This one, he screwed on. I going to try it'l go this way. If not, he can always weld it on... I doesn't want to try it now, cause he's afraid it all bend of the heat. But it's a final option... Will look like...... put some movement in the amp. Made a fiberglass plate. Here...

Montag, 23. August 2010, 21:21

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

Started to make a hinge. He went to see the store, but they didn't had what he needed. So got some aluminium .. The meaning of this hinge, is that the amplifier can go up. So the crowbar needed to be something nice. Cause the crowbar wil be very shot/small, he made it strong enought. (15mm thickness) there are nicer things in life to do, but when it's finished, it was worth the work in his eyes. Against the alu tube, he's going to weld a piece to, where he can hook the amp on.

Montag, 23. August 2010, 21:20

Forenbeitrag von: »robolop«

FOCAL BERYLLIUM BMW

started to make the bottomplate. She will be around the BOX and rest on the chassis of the car. did it as good as possible. Leveled it with waterleveler. Once this plate is right, you take the messurements always from this plate, so it has to be 100% correcT. milled to upperboard

Partnerseiten: Bussgeldkatalog,